Temperature Specialists, Inc. - Platinum Wire Wound RTD Elements

Elements with other resistance values, Temperature coefficients and sizes are available.
Temperature range : -200 Deg. C to +550 Deg. C
The P series of RTD´s above meet the requirements of IEC751 and DIN 43760 as below

Class A
Ro= +/ -0.06%
TCR= .00385 Ohms/Ohm/Degree C +/- 5 ppm/Degree C
Temperature Range= -100 Deg. C to +400 Deg.C
Class B
Ro= +/ -0.12%
TCR= .00385 Ohms/Ohm/Degree C +/- 13 ppm/Degree C
Temperature Range= -200 Deg. C to +550 Deg.C
Class C
Ro= +/ -0.24%
TCR= .00385 Ohms/Ohm/Degree C +/- 13 ppm/Degree C
Temperature Range= -200 Deg. C to +550 Deg.C

Closer tolerances of Ro are available please inquire.

Unit of Measure

Items	P01000-T.C.R.-Ro Platinum Wire Wound RTD Elements	P01001-T.C.R.-Ro Platinum Wire Wound RTD Elements	P01002-T.C.R.-Ro Platinum Wire Wound RTD Elements	P01003-T.C.R.-Ro Platinum Wire Wound RTD Elements	P01004-T.C.R.-Ro Platinum Wire Wound RTD Elements
T.C.R in Ohms/Ohm/Deg. C	N/A D = DIN .00385	N/A D = DIN .00385 J = JIS .003916	N/A D = DIN .00385 J = JIS .003916	N/A D = DIN .00385 J = JIS .003916	N/A D = DIN .00385 J = JIS .003916
Resistance (Ohms at 0 Deg. C)	N/A 100
Lead Wire - Diameter inches (mm)	N/A .007" (0.18) Palladium	N/A .010" (0.25) Palladium	N/A .010" (0.25) Palladium	N/A .012" (0.30) Palladium	N/A .012" (0.30) Palladium
Response Time in Seconds - Water, V=0.4 m/sec - 50%	N/A .08	N/A .11	N/A .14	N/A .18	N/A .26
Response Time in Seconds - Water, V=0.4 m/sec - 90%	N/A .21	N/A .32	N/A .39	N/A .51	N/A 1.0
Response Time in Seconds - Air, V=1.0 m/sec - 50%	N/A 4	N/A 7	N/A 9	N/A 11	N/A 14
Response Time in Seconds - Air, V=1.0 m/sec - 90%	N/A 13	N/A 24	N/A 30	N/A 42	N/A 53